For Sale:
The engine, gearbox, ECU etc. out of this 246 GTS Dino replica
With spare gearbox and OE plenum 480 pounds.
The engine and gearbox were removed from the Dino replica because of 'a gearbox issue'.
I wasn't sure if the 'issue' was a big one or a small one, so I bought a good secondhand gearbox of the same type (C503 and cable shift), just in case.
The 12v engine is a shorter stroke than a 164 12v, and is a late variant, having the stronger later type rockers etc.
I have a much nicer 2.5 GTV RWD front (right) cam cover at extra cost. The front cam cover on the engine has had its oil filler moved to the back of the engine.
I have a 2.5 GTV RWD rear (left) cam cover, but obviously this has no FWD plenum mounts.
My plan was to fit carbs to this Busso, but not now.
Bookmarks